Top Z-Edge S4 Features To Look At

Share:

Night Vision

The night vision on this dashboard camera is really special. The Sony image sensor is geared to compensate for both low and high light and to provide crisp and clean details no matter the available light levels. The same technology works during the day to prevent artifacts and white-balancing issues, but the pictures you can get at night are truly amazing.

This can help catch someone trying to break into your car as well as someone who might hit your car and run away. It’s even able to record for about half an hour without any external power source – a sure way to make sure your car is protected no matter what else is going on.

Interface

While the Z-Edge S4 has many cool internal features, drivers get to access the features through a stellar 4-inch interface. It’s one of the bigger interfaces you’ll find on a dashboard camera and it’s certainly one of the most user-friendly. It’s easy to watch recordings on the screen and to switch between cameras with just a button-press. With clear labels and functional buttons, this is an interface that even new users will master in a few moments.

Posted in Uncategorized

BlueDriver OBD2 Diagnostic Scan Tool Review (ABS, Airbag, Transmission Codes)

Share:

Hey guys, Derek Chase of 10CarBest on World.EDU here and this is my tool review for the BlueDriver OBD2 Scanner. So the OBD2 Scanner is something that reads the check engine light. But the BlueDriver is much more than that, and I’m really excited to show you why. As usual full comparison review with other OBD2 scanners could be found here.

Unboxing

So let’s start with the box it comes in. Take it out, do a little unboxing here. This is very small. It works off of Bluetooth so you’re going to need a smartphone or a tablet. But there are no wires to get in the way and the app is free. So now you have an idea of what we’re looking at, let’s go check out the box.

Right on the box it shows you where you can get the app. You get it for Android devices or Apple devices. The back of the box shows us that we have a one year warranty. It works on iPods, iPhones, iPads and pretty much any Android device with Bluetooth. On here, it specifies that this will work on all 1996 and newer vehicles that are sold in North America. And then all vehicles sold in Europe, 2001 and newer and that’s for gas. And then 2004 and newer for diesel. For Australia and New Zealand it’s all 2006 and newer vehicles. And then it says for other countries check your manual for OBD2 compliance. The BlueDriver’s designed in Canada and made in China.

Field Tests

We’re in my pickup truck which is a 2001 Mazda. Like most cars, you just go underneath the dash. This is where you’ll find your OBD2 port. All you have to do is grab your BlueDriver and match up the connector and push it right in. So right now I don’t have the app on my phone. I’m going to show you how easy it is to get it in real time. You just go to the Play store. Type in BlueDriver. Hit install, accept. It’s downloading. It’s installing and you hit open and boom. Great thing about the Android app, you can see right here it’s asking you to turn on the Bluetooth so it will connect automatically. So I’m just going to hit yes.

And with the BlueDriver connected to the OBD2 port, turn the key to the run position. The blue light will flash and will let you know it’s connecting to your device. If it flashes red then there’s a problem with the connection and just restart this process. On the screen, it will let you know the device was paired, and then now you can use the scanner. I’m going to show you the screen in the dark so you could see it better, and then I’m going to switch over to an iPad.

Data Gathering

Okay so now that it’s dark, we’re going to switch over from my Android cellphone to the iPad. Now you could use the BlueDriver with the car in the run position or with the car actually running. In this case, I have my truck running, and what you notice right away is you have this really simple interface right on the home screen of the app. You click there to read the codes, you click there to clear the codes. If you have any codes you want to see any reports, you click there to get the repair reports. You have any codes you could see the freeze frame data. You could check the emissions and the smog to see if you’ll pass emissions. You have mode 6, you have information about your check engine light, how long it’s been on, stuff like that. Vehicle information and then a little flashlight. And at the bottom here, you could click live data. And then the live data pops up if you want to look at that. And you could click at the bottom again where it says more and then you get the options and stuff. The user manual, settings, to updating the sensor, other stuff like that.

So we’ll go back to the main screen. Now you got a quick overview of the app. Now let’s go to the most common feature with this thing, it’s read the codes. Which sets it apart from most of the other OBD2 scanners is this right here. On most OBD2 scanners you could check the check engine light. But with the BlueDriver, what you could do is you could check the check engine codes, you could check transmission codes, ABS codes, airbag codes, and other module codes. So right now you can only get the airbag, ABS, transmission and other module codes on American vehicles such as Ford, GM, and Chrysler. But you could get the check engine light codes on any OBD2 vehicle.

Scanning

But since we’re in a Ford vehicle, let’s go do a full scan. So we’re going to go to all system modules and check that one. And it’s going to go through this process. It does take a little while but that’s because it’s scanning everything. And by little while, it takes like two minutes. Okay so after about two minutes we get all our information popping up on the screen. Let’s take a look. You could see here, we don’t have any check engine lights, we don’t have any transmission lights. We have one Powertrain control module code, it’s a P1000. And then if you click on the code, depending on if the data is in … No the data isn’t in their database. If your VIN number and the code is in their database, it’ll give you information such as probable causes and the top reported fix so what people have done to fix that code. But a P1000 code is just a OBD2 system readiness check. It’s nothing important.

So we’ll go back, so we got that one done. Now we have two anti-lock brake module codes, C1233 and a C1234. Again, you could click on the code to see if it comes up but there’s no data in their database for my vehicle so it’s not going to tell me where it is. Again, you could just look it up real quickly. And they always update any information they get, so every Monday there’s new updates. So maybe this week my vehicle isn’t in their database but the next week it will be because they see that I’m running it.

Powertrain Codes

Now you could just tap right here to clear those codes, specifically. I’ll clear the Powertrain module code as well. The last code that we have is a B1318 code and that’s listed under generic, electronic module codes. It means that the battery voltage is low, and I actually have a problem because my feasible link is bad. So I’m going to clear that. I’m going to fix my feasible link soon, I’ll have a video on that and I’ll explain all about that. That gives you a good idea on how you could read the codes and clear the codes. If you wanted to clear all the codes really quickly you just come here and hit clear and it clears everything.

Let’s just say you do have some check engine light codes or transmission codes or ABS codes or airbag codes, whatever the case may be, and you want to know more about the codes. You just come right here to repair reports, here’s a sample report for a P2716 code and you just click report. And this is a pressure control solenoid circuit malfunction. And it gives you all of this information right here. It gives you the four possible causes of this check engine light. It could be that the ECM has failed or there’s different problems with the shift solenoid. It gives you the top reported fix, and the top reported fix is to replace the PCM. It gives you three frequently reported fixes, and then down here it gives you all the fixes that people have done that have also worked. So with one check engine code you get all this information, potentially. Again, it doesn’t have all this information for every check engine code for every car, but based on your VIN, based on what codes that you have, you could get a lot of information. And just makes diagnosing the problem that much more simple.

Other Features

We’re going go back to check out other features. Freeze frame, if you have a check engine light and you want to know when the check engine light happened, under what conditions, you’ll get all that information here. Obviously I don’t have a check engine light but you could see all the different parameters it’ll be checking.

The smog check, we’ll check that out. You could run a smog check, I’m going to do that right now. This will actually run a smog check so you know if you’re going to pass emissions. So before you head over to DMV to go get your car inspected, you could come here and check it yourself.

You also have mode 6. This is a great feature. Again, that is not common on most OBD2 scanners. What mode 6 does, it allows you to check each sensor and to see if they’re within the parameters. So you could click on a sensor, for example this is the rich to lean sensor threshold voltage and I could see specifically the voltage. Okay, the minimum, here’s the value that we have and then your maximum. And you could do that for a bunch of different sensors. So that’s mode 6.

You could go over here to mil status and if your check engine light is on it’ll give you information such as how long it’s been on. If it’s been on for three days, 20 days, a year and then how far you been driving with it on, which is really helpful for when you’re buying a used car.

Then you could have your vehicle information. And basically, you just enter your VIN and it’ll give you information on where your vehicle was made, what year, all that good stuff.

The last thing they included is a flashlight, and I just blinded myself and the camera, and you could turn your screen into a flashlight so you could see things. For example, I’m working in my truck right now on top of my center console. That could actually be pretty useful, especially if you don’t have a flashlight. Usually cellphones have a flashlight feature though but a neat little addition.

Live Data

Let’s go over to live data. This is pretty cool stuff. So you click the little gear at the top left corner. And then you could get all the supported sensors that your car has. Right now I have engine RPMs, timing advance for cylinder one and then the oxygen sensors, the voltage. You could actually see the graphs. That green graph right there that’s the oxygen sensor, that should be bouncing up and down. I’ll have a video all about oxygen sensors and how to test them and how to use graphs like this to see if they’re working properly or if it’s your catalytic converter that’s bad.

If you want to save this information or you want to share, you just click in the corner here. That pops up, you could email it to yourself, put it on Twitter, Facebook, make a copy, put it on Dropbox. Pretty much get it to yourself anyway you can.

Another neat feature, if you click on the arrow here, you get a gauge. Not only do you get a gauge but you also get the voltage in a digital readout and you’ll get a little graph under here. So these are just little features that the BlueDriver has that I’m trying to point out to you.

That’s basically it. So now I’m going to go turn on the sunlight and we’ll finish up this product review. Okay back to the daylight. Overall, if you can’t tell, I really like the BlueDriver. For the price, with all the features it has, especially the capabilities to read airbag codes, transmission codes, ABS codes and all those other different modules. That really sets this apart. Not only that, this is really easy to use. It’s super easy interface. People who don’t know about cars, if you’re a beginner, you don’t really know too much but you don’t want to spend a lot of money and you don’t want to take your car to a dealership, check the code yourself. You could use this. You could get all that good information on repair reports and it’s just something that’s going to be helpful.

Overall

I’ve been talking about a lot of positives, some negatives. You do need a smartphone or a tablet. Not everybody has a smartphone or tablet. While that is a negative it’s also a positive because you’re piggy backing off of the fast processor in your smartphone or tablet. Normally, you don’t have fast processors in scanners, unless if they’re really expensive. The other thing is, this makes it wireless. Wireless is nice.

So again with simplicity, it’s just this adapter and your smartphone or tablet. Compared to all these different things. Here’s an old brick, snap-on brick. You have to put all these different things in there for different vehicles. They plug in. Obviously, this is old technology. There’s all these different wires and adapters and stuff. Now this has its place, I’m not saying this is bad. It’s also older technology but I’m just proving a point. This is not wireless, this isn’t as easy, this is more complex to learn. Meanwhile, this is nice and simple and for the price you can’t beat it.